Mac

How To: Disable Dashboard in OS X

Posted by Rick on in Apple, Technology How To's 0 Comment

How To: Disable Dashboard in OS X

Dashboard in Leopard is a love it or hate it application. There are several useful applications that can make life easier. On the other hand, it’s easy to hit the activation buttons on Mighty Mouse by accident. Other people may begrudge Dashboard’s use of memory. It’s not much, but on low end machines every bit counts.

This is how to disable Dashboard:

Open Terminal (as an admin user)

type: defaults write com.apple.dashboard mcx-disabled -boolean YES

Hit Enter

type: killall Finder

When Finder restarts, Dashboard should be gone. To turn it back on follow the same instructions, but replace YES with NO.

The first command is the powerful one. There are a lot of default behaviors that can be changed in OS X if the write command is known.

The second command, killall Finder simply does the same as force quitting Finder from the GUI. It forces the Finder to quit, relaunch and reload everything, including the Dock. In this case it does not relaunch Dashboard though.

Please let me know if you find this helpful. Also suggestions for other terminal commands would be appreciated.

How To: Extract .tgz files with Tar

Posted by Rick on in Apple, Linux, Technology How To's, Unix 0 Comment

How To: Extract .tgz files with Tar

.tgz files have been used in Unix for years. Originally created to handle backups to tape, it’s now commonly used to archive groups of files together such as installers for software. This is where most people run across the confusing .tgz, tar.gz, or tar.bz2 file extensions.

These instructions should be universal for most Unix systems, Linux, BSD, OS X, and even Solaris. Please feel free to leave a comment if they’re not.

To get to tar’s help files, simply type: man tar

The output will look something like this:

TAR(1) tar TAR(1)

NAME
tar – The GNU version of the tar archiving utility

SYNOPSIS
tar [options]

Operations:
[-]A –catenate –concatenate
[-]c –create
[-]d –diff –compare
[-]r –append
[-]t –list
[-]u –update
[-]x –extract –get
–delete

Common Options:
-C, –directory DIR
-f, –file F
-j, –bzip2
-p, –preserve-permissions
-v, –verbose
-z, –gzip

So for extracting tar files, we will use the x and f options. Thus:

tar xf filename.tar

Will work fine. Note that the same command should usually work for any file that has the tgz, tar.gz, or tar.bz2 extensions too. The tar command should automatically detect the file type and call gzip or b2zip. If it doesn’t there are two more commands.

For .tgz or tar.gz files, add a z to the command: tar xzf filename.tgz

For .bz2 files, add a j : tar xjf filename.tar.bz2

At this point the file should unzip and untar into the same directory as the archive file. Sometimes an auto installer will come up, but that is still pretty rare.

How To: Edit MAC Address on Linux

Posted by Rick on in Linux, Technology How To's 0 Comment

How To: Edit MAC Address on Linux

Your network card in your linux box just got replaced. Or the onboard one on the mother board went bad and now you need to get it up. But Linux is not automatically recognizing the new card correctly.

Get to a terminal prompt. Type ifconfig to get the current mac address. Keep in mind that you may need to watch the boot up process to find out what your network card’s device name really is. It’s usually eth0, but em0 or even en0 are common. Also it may not be the first or ‘0’ device, so eth1 is entirely valid. Out put will look something like this:

eth0: flags=8863 mtu 1500
inet6 fe80::21f:5bff:fee8:b40d%en0 prefixlen 64 scopeid 0x4
inet 127.1.1.1 netmask 0xfffffc00 broadcast 127.1.1.255
ether 00:1f:5b:72:b4:aa
media: autoselect (1000baseT ) status: active
supported media: autoselect 10baseT/UTP 10baseT/UTP 10baseT/UTP 10baseT/UTP 100baseTX 100baseTX 100baseTX 100baseTX 1000baseT 1000baseT 1000baseT none

The MAC address is the 6 hexadecimal numbers on the line that says “ether” so 00:1f:5b:72:b4:aa is the MAC address. This number is also written on a sticker on almost every device with a network device these days. It’s even included on the outside box of many new computers as it’s a very distinctive number.

Next is to edit the file this info is kept in. Go to:

/etc/sysconfig/network-scripts/ifcfg-

Edit (or totally remove if you’re using DHCP boot) the MAC address line. Save the file and reboot!

How To: Reset Admin/Root Password

Posted by Rick on in Hacking, Microsoft, Technology How To's 25 Comments

How To: Reset Admin/Root Password

Anyone who has been in the IT business for any length of time knows literally hundreds of passwords. As we get older though it becomes harder and harder to remember each password and continue with safe security practices. Many companies have gone to centralized password systems. But such software is not always compatible with every OS there is. In such cases as the four year old FreeBSD server sitting in the corner that serves one application. So, here is a large list on ways to reset the root password or administrative user on many operating systems. Keep in mind that these instructions all assume you have physical access to the server in question.

FreeBSD (all versions)

  1. Turn Server off. Hitting the Power Button should start a shutdown cycle.
  2. Hit ESC when the OS starts booting
  3. Choose option 4 to boot into Single User Mode
  4. When asked for a shell, hit enter to default to /bin/sh
  5. Once the machine is booted and you see the hash, type
    1. mount -u /
    2. mount -a
  6. Type passwd to reset the password
  7. Enter new password and confirm it. “pam_chauthok(): error in service module” means that the filesystem is not mounted. Follow step 5 again.
  8. Type reboot or hit the power button again to reboot the machine normally.

Linux (Lilo Loader)

  1. Reboot machine
  2. Hit Esc to get to boot prompt if it doesn’t to it automatically
  3. type: linux single
  4. type: passwd
  5. Enter in and confirm new password
  6. type: sync
  7. type: reboot

Linux (GRUB loader)

  1. Reboot machine
  2. Hit Esc to get to boot prompt if it doesn’t to it automatically
  3. Select the Kernal. Hopefully there is only one or two and the names are descriptive. But any one SHOULD work.
  4. type: e
  5. Select the line that starts with “Kernal”
  6. type: e (again)
  7. Add the letter s (in lower case) to the very end of the line
  8. Hit Enter
  9. type the letter b to start booting
  10. Mount the drives type:
    1. mount -t proc proc /proc
    2. mount -o remount,rw /
  11. type: passwd
  12. Enter in new password and confirm it
  13. type: sync
  14. type: reboot

OS X (All Versions) OS X has two ways to reset the Administrator Password.

Option 1:

  1. Find the computer’s original boot disc. These are system specific. If it’s not available, any OS X retail boot disk will work. The wrong disc will give an error message.
  2. Boot off the disc. Accomplish by holding down the c key during power up.
  3. At the Menu go to: Utilities
  4. Choose “Reset Password”
  5. Enter in new password and confirm
  6. Click on Installer
  7. Choose Quit

Option 2:

  1. Hold Down Apple+S while booting computer
  2. Type: sh /etc/rc
  3. Type: passwd root (if that doesn’t work try admin or administrator instead of root)
  4. Enter in new password and confirm
  5. Type: reboot

Solaris (On Sun Hardware)

You must have the Solaris CDRom to do this. If you do not have physical media, get it here. Note that this download is for Ver10, so may not work on older versions.

  1. Reboot Machine
  2. Hit Stop +A to get to the OK prompt
  3. Type: boot cdrom -s
  4. Once booted off the CDRom, type: mount /dev/disk/c0t0d0s0 /a (those are Zeros)
  5. Type: vi /a/etc/shadow
  6. Use the h,j,k,l keys to move around in vi (or go here for more commands)
  7. On the second line, which says root:<bunch of random letters/numbers> type: dd
  8. Type: :wq! to save and quit out of vi
  9. Type: umount /a
  10. Type: boot ok -s (to boot into single user mode)
  11. Type: passwd
  12. Enter in new password and confirm it
  13. Type: reboot

Note that many Solaris systems may have mirrored volumes, a volume manager or other method of copying the full filesystem. If this is the case these instructions will need to be followed for both volumes, otherwise corruption can easily occur.

Solaris (i386/Intel Hardware)

Again you should have the CDRomto boot off of.

  1. Reboot Computer
  2. Enter Bios and Change Boot Order to CDRom first if needed
  3. Boot Computer
  4. On Boot Menu choose Single User mode, which is Option 6 on Solaris 10
  5. Choose Yes when asked to mount the root filesystem
    1. If you choose “No” it can still be mounted with the same command, /dev/disk/c0t0d0s0 /a (those are Zeros)
  6. Type: vi /a/etc/shadow
  7. Use the h,j,k,l keys to move around in vi (or go here for more commands)
  8. On the second line, which says root:<bunch of random letters/numbers> type: dd (to delete whole line)
  9. Type: :wq! to save and quit out of vi
  10. Typ: cd /
  11. Type: umount /a
  12. Type: init s
  13. At password prompt hit enter key
  14. Type: passwd root
  15. Enter in new password and confirm it
  16. Type: reboot

General Windows

Amazingly Windows Server does not have an easy way to recover the password. Microsoft would call this security, but do provide a package of recovery software that does the job. But it costs $199. Tech Trax has an article on reseting the password on XP system via the XP install disc. Or you can download an emergency boot cd from here, here, or buy a password cracker from here. Be extremely careful with downloading Windows password crackers from the Internet. Yes they may work, but it’s more likely they are actually a Virus or a Trojan and could cause more problems then you have already.

*edit* Hiren’s BootCD has several utilities that will allow the reseting of Windows passwords.

Windows 7
This does not reset the password, but allows you to make a new Administrative user who can then change the password in the control panel for the other user.

  1. Boot off your Windows 7 DVD
  2. Choose “Repair your computer”
  3. Go to the recovery environment
  4. Open command prompt
  5. Type “cd windowssystem32”
  6. Type “Rename Utilman.exe Utilman.exe.bak”
  7. Type Copy cmd.exe Utilman.exe
  8. Reboot Computer
  9. At Login Screen, hold down the Windows and “U” keys
  10. Type net user /add NewAccount mypassword (use your own name for NewAccount)
  11. Type net localgroup administrators NewAccount /add (replace NewAccount with the name used above
  12. Login with new user
  13. Go to Start -> Control Panel -> User Accounts and Family Safety
  14. Click on User Accounts
  15. At the bottom of “Make changes to your user account area” click “Manage another account”
  16. Choose old user
  17. Click “Change Password”
  18. Enter the new password
  19. Logout of the current account
  20. Login to the old account with the new password

Windows 8
User the Microsoft Diagnostic and Recovery Tools (download here) to reset the password.